March 23, 2019
Does wiTECH 2.0 replace the wiTECH Diagnostic Application ?No, wiTECH 2.0 and wiTECH 1.0 are both essential tools. wiTECH 1.0 is still required for legacy vehicles’ bus support. Starting in July of 2017, vehicles that are fully functional in wiTECH 2.0 will no longer be available in wiTECH 1.0.
Can I continue to use wiTECH 1.0 even after wiTECH 2.0 has been installed?
Yes, wiTECH 1.0 and wiTECH 2.0 can be used by your dealership. microPods are dedicated for use with either wiTECH 2.0 or wiTECH 1.0.
Will wiTECH 2.0 use my current network equipment?
Yes. With the rollout of the wiTECH Diagnostic Extender program your dealership is now equipped with the necessary network hardware to operate wiTECH 2.0. As part of the wiTECH 2.0 installation process at your dealership the agent will configure one of your dealership's VCI devices to allow operation with the wiTECH 2.0 system.
Why should I use wiTECH 2.0?
wiTECH 2.0 application is a new standard for vehicle diagnostics. Upcoming vehicles require the use of wiTECH 2.0 due to changes in the vehicle electronics. Given the significant speed advantages of the wiTECH 2.0 system, it should be clear why you would want to use wiTECH 2.0.
Essential tools normally come with hardware. Why is this different for wiTECH 2.0?
The hardware components of wiTECH 2.0 were deployed in CY 2013 with the wiTECH Diagnostic Extender program. With that program, you received the necessary hardware to use wiTECH 2.0, including a single microPod device. We strongly recommend that you purchase adequate microPods for your technicians. There is no excuse, as microPods are the lowest cost OEM vehicle communications interface device available. A dealership can recover its purchase price almost immediately through additional service sales.
Will wiTECH 1.0 still be usable after its retirement?
wiTECH 1.0 is currently required to diagnose legacy vehicles’ bus and will remain operable for these vehicles. This also includes vehicles that utilize the DRB III Emulator.
Vehicle Communications Interface (VCI) Device Questions
Does WCP microPod work with DRB III Emulator?
Please be aware that WCP microPod does not support some legacy protocols. We recommend that you purchase more recent versions of the microPod device to ensure full vehicle support.
Will the VCI Pod be supported with wiTECH 2.0?
No, the VCI Pod does not support all FCA US vehicles. microPod has become the new standard for vehicle diagnostics and it has superseded the VCI Pod.
Will the StarMOBILE be supported with wiTECH 2.0?
No, the StarMOBILE device cannot be supported with wiTECH 2.0.
Can I use my VCI devices in wiTECH 2.0 using a USB connection?
The wiTECH 2.0 model is a network connected model where the VCI device communicates directly to back-end cloud servers. This is driven in part by diagnostic application security requirements. It is not feasible to operate the server software on a PC. Moving forward, it is critical that the service shop have reliable network connectivity to permit vehicle diagnostics.
Network and Connectivity Questions
What if I don’t have an internet connection or my location has unreliable connectivity? Can I still use wiTECH 2.0?
You can use a hotspot or other cellular technology to allow connection, but wiTECH 2.0 is an online-only model. For business use, wireless devices that provide backup cellular capability (e.g. Cradlepoint devices) prove to be effective in allowing the dealership to continue uninterrupted operations.
Can I perform road tests?
Yes. wiTECH 2.0 is an online model, so you will need to connect your microPod device and tablet to a mobile hotspot or cellular modem. If your tablet or phone has a built in hotspot, then you can just connect your microPod to your mobile device. This configuration makes for a simple on road experience. We strongly suggest that you take a partner on drivability rides to operate the mobile device to ensure you are not distracted during your testing. As with the wiTECH 1.0 system, an internet connection is not required when the VCI device is in flight recorder mode.
What hotspot does wiTECH 2.0 support?
We have used a variety of devices ranging from smartphones, cellular modems like Mi-Fi, and USB cellular dongles. If you choose to use your personal cellphone, remember that you may be charged for the data transfer by your carrier.
Why didn't wiTECH 2.0 fix my networking issues?
Almost all networking problems, outside of hardware device failures, are the result of Wi-Fi or wired infrastructure issues in the dealership. It is important that the dealership have full Wi-Fi coverage in the service shop by installing sufficient access points. We support more than 10,000 dealerships worldwide using TCP/IP networking protocols. We know that networking requires appropriate technical talent be available to the dealership. It is important that the dealership understand this as well. Within the NAFTA market we have found that network complaints almost exclusively result from simple, solvable concerns covered by knowledge base articles. Please refer to the Networking section of the knowledge base for articles that will help your IT department resolve the majority of issues.
wiTECH 2.0 System Requirements
What browsers does wiTECH 2.0 support?
We officially support the same browsers as the FCA ICT department supports for DealerCONNECT: Internet Explorer versions 11 as well as Safari versions 7+. Please note that Apple no longer supports Safari on the Windows OS. We cannot test all browser implementations on all computers, tablets, and smartphones so you are free to experiment and determine if your favorite browser is supported for your use.
What display devices does wiTECH 2.0 operate on?
wiTECH 2.0 is device agnostic, meaning we do not require a specific PC, tablet, or smartphone since the application is web browser based. It is being used on a wide variety of PCs, tablets, and smartphones today. It will also operate on the device you use for wiTECH 1.0. We do not guarantee proper operation on all devices as testing all possibilities today is not feasible. We do recommend that you use reliable, safe equipment, appropriate for use in service shop environment.
What vehicles are supported in wiTECH 2.0? Does it have the same vehicle support as the wiTECH 1.0 Diagnostic Application?
Currently, wiTECH 2.0 does not fully support multi-protocol bus vehicles, though full support will be added shortly. For now, use your wiTECH 1.0 system to service the multi-protocol vehicles. Specific vehicles not presently supported are also discussed in this wiTECH 2.0 Knowledge Base under the wiTECH 2.0 Issues and Limitations section.
Comments will be approved before showing up.
July 16, 2020
Flash Token for diagnosing and programming any ECU module. It provides unlimited module Flash access for the token attached VIN, for a period of 1 year.
- Active wiTECH 2.0 Software license. (Required to diagnose, flash and Restore Vehicle Configuration.)- Active TechAuthority Software license. Required for flash, Secure Gateway (SGW) access, and Restore Vehicle Configuration.
April 24, 2020
April 06, 2019 1 Comment
Every day, technology changes and that technology is going into the vehicle; it just more than just fixing cars. We have special factory tools and software subscriptions. Get the technology and resources that don't exist for other independent shops. Our gold is to provide in-depth knowledge of new systems that will be available to your workshop.
Diagnoex | RI Labs Inc., California, USA. Provide dealer level automotive diagnostic solution—the bridge between OEM dealer Tools, software, and the aftermarket repair shops. We facilitate OEM-level diagnostic solutions with dealer-level support for on-car computer programming, maintenance, and repairs. We only sell original equipment and parts.
At Diagnoex, we believe that honesty, integrity, and respect are exceeding the expectations of our associates and our customers. The concept of doing the right thing for the first time., no matter what, is embedded into the values that we all strive to fulfill throughout our work, commitment to quality, and authentic products.
Sign up to get the latest on sales, new releases and more…
© 2021 Diagnoex | RI LABS INC.
All trademarks, service marks, trade names, trade dress, product names and logos appearing on the site are the property of their respective owners, including in some instances DIAGNOEX. Any rights not expressly granted herein are reserved.