Chrysler wiTECH 2 Software License Subscription

$ 1,600

wiTECH 2 is the professional dealer level OEM diagnostic tool for Chrysler, Dodge, Jeep, Fiat, and Alfa Romeo. It is the Chrysler's newest automotive diagnostic software application. To use the wiTECH 2 software, it needs an FCA witech2 license subscription and original Mopar secure Micropod 2 hardware interface which Made in the USA. The essential automotive tool for 2017, 2018, 2019, 2020 or newer models with secure gateway module.

Mopar Secure Micropod II

$ 1,850

The Mopar Secure Micropod II is the newest Chrysler dealer level diagnostic tool which replaces the existing wiTECH VCI POD and Chrysler Starmobile scan tool. The original Micropod II, Made in the USA and it is the only factory interface that works with wiTECH 2.0 FCA subscription for Chrysler, Dodge, Jeep, Fiat, and Alfa Romeo.

Nissan CONSULT III plus with GT-R OEM Dealer Package

$ 5,500

The Nissan CONSULT III plus with GT-R is the professional dealer diagnostic scan tool use in Nissan & Infiniti dealership.  This dealer package comes with CONSULT 3 software installed on Panasonic Toughbook CF-54 computer. Master technicians use this tool for short test DTC, single module scan, ECU, TCM blank transmission module programming, immobilizer, EV Hybrid maintenance function and ADAS calibration with targets.

Nissan Consult III Plus Software Subscription

$ 1,600

The CONSULT-III plus (C-III plus, C-III+) is the dealer diagnostic scanner tool was explicitly designed to support future technology requirements on Nissan and Infiniti vehicles. This dealer diagnostic tool used in Nissan Infinity dealership. Development of this new tool assists by the advice and suggestions given to Nissan by technicians attending numerous focus groups during the development phase. C-III plus represents a leap forward in vehicle diagnostic technology.

Toyota TIS Techstream OEM Dealer Package

$ 6,950

Techstream TIS 2.0 is the official OEM diagnostic tool/software used by Toyota Lexus dealer technicians. It supports diagnostic, reprogramming, immobilizer and service functions for Toyota, Lexus, Scion vehicles. This Snap-on original Kit comes with Panasonic Toughbook CF-31, docking station and VCI interface.

SUZUKI SDT 2 Smart Diagnostic Tester

$ 1,850

SUZUKI SDT 2 Diagnostic Tool Kit is the new generation PC based diagnostic tool from Suzuki. This tool is faster compared to older SDT, and it supports immobilizer functions. The SDT 2 has similar diagnostic features compared to the original SDT, plus new features like VIN Lookup, Vehicle Health, and Communication Bus Check. The SDT 2 WiFi dongle is allowing you to diagnose vehicles remotely from your workbench. SDT 2 requires a software subscription. The SDT 2 diagnostic software only works on the latest Suzuki model vehicles

Jaguar LandRover SDD Pathfinder License Subscription

$ 1,600

The Pathfinder software works with new DoIP interface to diagnose and reprogram 2017 and late model vehicles. The ever-growing complexity of electronic systems in automotive and need for the large volume of data communication between vehicle networks means that Jaguar LandRover Automotive felt the need for a more effective vehicles communication network like Ethernet and Hybrid Cloud system. They developed an entirely new system Pathfinder with DoIP interface, and it allows faster diagnostic, programming and communication, making it more quickly to use and saving valuable time.

Jaguar LandRover DoIP VCI Pathfinder Interface

$ 1,750

DoIP VCI Interface is the only unit that will be compatible with new Pathfinder application. BOSCH manufactures this original interface and assembles in Germany. Wireless Bluetooth connectivity available for the interface and the computer.  The interface has an LCD screen, after the firmware update it shows Jaguar and LandRover logos, no other functions show in that screen.

Car Diagnostic Package - Dell Rugged R5414 ATG

$ 1,599

OVERVIEW SPECS IN THE BOX REVIEWS OVERVIEW SPECS IN THE BOX REVIEWS The Domestic Car Diagnostic Package offers dealer level diagnostic coverage for General Motors,...

VI2 Nissan Consult III Plus Diagnostic Interface

$ 2,800

Nissan VI2 interface works with Nissan Consult-3 plus application, for all Nissan, Infiniti, GTR R35 and Renault vehicles. Nissan Consult-3 plus supports Nissan cars electronic systems, diagnostic and programmer functions. Also, it supports Nissan electro mobiles such as Leaf. It comes with OBD II 16 pin connector for the new cars. Optional adaptor 14 pin connector will work with older car models. It has Bluetooth connectivity for C-III+ system.

Ford FDRS Software License Subscription

$ 1,000

Ford Diagnostic & Repair System (FDRS) - The next generation dealer diagnostic software. The factory Ford Motor Company vehicle diagnostic Software designed for use with Ford VCM II, VCMM and J2534 compatible Interfaces. FDRS provides complete dealership level vehicle diagnostic coverage for 2018 and forward vehicles. FDRS provides superior capabilities, is more user-friendly and provides more diagnostic tools than IDS. A software license is required to use IDS/FDRS software with a VCM, VCM II, or VCMM or FJDS/FDRS software with a VCM II or J2534 compatible device.

Ford VCM II Interface

$ 1,650

Ford VCM II, Vehicle Communication Module Interface works with IDS FDRS software to diagnose, program Ford, Lincoln, and Mercury vehicles. The VCM II use in the dealership for diagnostic and programming tool and VCM II required for all new 2016 Ford vehicles.
BOSCH manufactures this original interface and assembles in Germany.

Ford IDS Software License Subscription

$ 1,000

The Ford Integrated Diagnostic System, IDS - The dealer diagnostic software scan tool. The factory Ford Motor Company vehicle diagnostic Software designed for use with Ford VCM & VCM II, VCMM Interfaces. IDS provides complete dealer level vehicle diagnostic for technicians to diagnose and service Ford, Lincoln, Mercury vehicles, coverage up to 2018 and forward vehicles. The new FDRS coverage starts in 2018 and newer vehicles. A software license is required to use IDS / FDRS software with a VCM, VCM II

Mitsubishi MUT-III SE

$ 5,950

The Mitsubishi MUT III SE (Multi User Tester) is the newest scan tool provides complete diagnostic coverage of Mitsubishi vehicles. The MUT-III SE comes on Panasonic FZ-G1 Toughpad Windows tablet, VCI lite interface attached to the back of the touchpad connect with USB cable.  Subscription includes module reprogramming, key programming (NASTF), and many other functions. This authentic diagnostic tool used every day by Mitsubishi dealerships technicians and service departments with the same level of functionality.

Panasonic Toughbook CF-54 Laptop Computer

$ 1,600

The Toughbook CF-54 14" Touchscreen Laptop Computer from Panasonic features a spill-resistant, full magnesium alloy design, hard drive heater, and backlit keyboard. It is MIL-STD-810G certified and offers 3' drop, shock, vibration, dust, altitude, high/low temperature, temperature shock, and humidity resistance. It offers anti-glare and anti-reflective screen treatments and offers dual drives. The notebook features an Intel Core i5 processor that delivers optimum performance with the battery life of up to 11 hours. The system is pre-installed with Windows 7 or 10, ideal for may automotive application as Nissan Consult III Plus, Chrysler wiTECH 2.

BMW ICOM NEXT

$ 1,250

BMW ICOM NEXT A is a diagnostic head unit for all BMW cars and motorcycles. It supports newest F-series and all G-series, it is capable of diagnostic, coding and programming capabilities on BMW, MINI and Rolls Royce vehicles by using BMW Online Service System - OSS. This (Wireless) Vehicle Communication Interface is design to use with ISTA/P and ISTA/D, interface support many protocols ISO-9141, KWP, CAN bus and FlexRay
The original interface manufactured by ACTIA Germany.

Mercedes Xentry Tab

$ 24,999

Xentry connect diagnostic tool for Mercedes BenzThe Xentry Connect is new Generate diagnosis tool for Mercedes-Benz with wireless to replace of the SD Connect and...

GM MDI USB Cable

$ 199

The Fiat 500 does not contain a FCMCGW or a TIPMCGW central gateway, and thus does not contain a Diagnostic CAN-C bus.

• OVERVIEW
• REVIEW
• ACCESSORIES
• Q&A

• GM MDI USB Cable.
• • The Fiat 500 does not contain a FCMCGW or a TIPMCGW central gateway, and thus does not contain a Diagnostic CAN-C bus. 
  • It features a CAN-C bus and a CAN-B bus, both of which are connected directly to the 16-pin J1962 diagnostic connector as follows:
    

** These images are for illustration purposes only

• Automatic vehicle recognition
• Clear Diagnostic Trouble Codes (DTCs) Live Data-stream with Recording
• Playback Functions for Main ECUs Guided Fault Finding
• New Software Re-flash for Existing ECUs Programming
• Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
• Program New Keys · Injector Coding · Set, Adjust or Remove Speed Governors DPF Regeneration · Brake Bleeding · Steering Angle Resets · All Other Dealer Functions
• Ford ® VCM II Part Numbers:
• Part Number:
• Part Number:
• • witech repair Q&A
  • OBD II Vehicle Cable
  • 12V Power Adapters
  • Trigger switch/cable
  • USB Cable
  • Carrying Case

Witech POD Smart Cable

$ 450

• OVERVIEW
• REVIEW
• ACCESSORIES
• Q&A

• DLC Smart Cable.
• • The Fiat 500 does not contain a FCMCGW or a TIPMCGW central gateway, and thus does not contain a Diagnostic CAN-C bus. 
  • It features a CAN-C bus and a CAN-B bus, both of which are connected directly to the 16-pin J1962 diagnostic connector as follows:
    

** These images are for illustration purposes only

• Automatic vehicle recognition
• Clear Diagnostic Trouble Codes (DTCs) Live Data-stream with Recording
• Playback Functions for Main ECUs Guided Fault Finding
• New Software Re-flash for Existing ECUs Programming
• Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
• Program New Keys · Injector Coding · Set, Adjust or Remove Speed Governors DPF Regeneration · Brake Bleeding · Steering Angle Resets · All Other Dealer Functions
• Ford ® VCM II Part Numbers:
• Part Number:
• Part Number:
• • witech repair Q&A
  • OBD II Vehicle Cable
  • 12V Power Adapters
  • Trigger switch/cable
  • USB Cable
  • Carrying Case

VOLVO VIDA Software License Subscription

$ 6,500

VIDA stands for "Vehicle Information and Diagnostics for Aftersales," is the luxury car manufacturer, VOLVO's factory software for the aftermarket. It is designed to use with DiCE diagnostic interface and provides complete dealership level vehicle diagnostic coverage for new and old VOLVO cars. You could subscribe to service and parts information along with wiring diagrams, and the ability to do flash programming.
The VIDA is not to get confused with VOLVO PTT Truck software. Also, Volvo Tech Info and VIDA are two separate systems.
VIDA 2015 has an extensive HELP section which can be reached from any point within VIDA simply by pressing the "F1" button on your keyboard.